Power System Designer
Features and Benefits
Features and benefits
Remote sense
Current limit
OVP and thermal shut down
Power boosters for higher power outputs
Resources
- Soldering Methods and Procedures for Vicor Power Modules
- Designing a Power Supply with Multiple Input Options
- Creating High Voltage Outputs
- Using Modular DC-DC Converters to Meet European Standards for Railway Applications
- Current Share Board
- Constant Current Control for DC-DC Converters
- Undervoltage/Overvoltage Lockout
- VI-200, VI-J00 Design Guide and Applications Manual
- 1. Zero-Current Switching
- 2. DC-DC Converter Pinouts
- 3. Module Dos and Donts
- 4. Overcurrent Protection
- 5. Output Voltage Trimming
- 6. Multiple Gate In Connections
- 7. Applications Circuits / Converter Array Design Considerations
- 8. Using Boosters and Parallel Arrays
- 9. EMC Considerations
- 10. Optional Output Filters
- 11. Battery Charger (BatMod)
- 12. AC Input Module (AIM / MI-AIM)
- 13. Harmonic Attenuator Module (HAM)
- 14. Input Attenuator Module (IAM / MI-IAM)
- 15. Ripple Attenuator Module (RAM / MI-RAM)
- 16. Offline Front End
- 17. DC Input Power System (ComPAC / MI-ComPAC Family)
- 18. AC Input Power System (FlatPAC Family)
- 19. AC Input Power System (PFC FlatPAC)
- 20. Thermal and Module Mounting Considerations
- 21. Thermal Curves
- 22. Lead Free Pins (RoHS)
- 23. Tin Lead Pins
- 24. Module Packaging Options (SlimMod, FinMod, BusMod and MegaMod Families)
- 25. Product Weights
- 26. Glossary of Technical Terms
- cURus – UL 60950-1, CSA 60950-1
- cTÜVus – EN 60950-1, UL 60950-1, CSA 60950-1
- CE Marked – Low Voltage Directive (2014/35/EU)
- CE Marked – Low Voltage Directive (2014/35/EU) and RoHS Recast Directive (2011/65/EU)
- CB Certificate – IEC 60950
- cURus – UL 60950-1, CSA 60950-1
- cTÜVus – EN 60950-1, UL 60950-1, CSA 60950-1
- CE Marked – Low Voltage Directive (2014/35/EC)
- CE Marked – Low Voltage Directive (2014/35/EC) and RoHS Recast Directive (2011/65/EU)
- CB Certificate – IEC 60950
MI-200™ / MI-J00™ DC-DC converters
Rugged DC-DC converters supporting traditional design
The MI-Series is designed for applications utilizing distributed power architecture and is based on the Vicor VI-200 / VI-J00 family of zero-current switching, component-level DC-DC converters. Operating at frequencies up to 1MHz, the MI-Series offers state-of-the-art performance in terms of power density, efficiency, noise, ease-of-use, and reliability. The Vicor industry-standard package enables the MI-Series to meet MIL-STD-810 environmental requirements for humidity, fungus, salt, fog, explosive atmosphere, acceleration, vibration and shock. Standard features such as wide-output trimming/programming, current limiting, remote sense, logic enable/disable and latching OVP and OTP combine to offer a high degree of protection, versatility and reliability for military power systems.
Promo Component
Related Products
Related Products
Legacy DC-DC converters supporting traditional designs
Rugged input filter module for MI-200/MI-J00
Rugged output ripple attenuator for VI-200/VI-J00
Family of DC-DC converters providing high density, low noise, with advanced power processing
Rugged AC input filter and rectifier for MI-2xxxx/MI-Jxxxx